Clogged drain

Most people know what clogged drains look like, but they don’t always know how to fix them. When your drains start to get clogged, it can be a big problem.  This is especially true if you’re not a plumber. You might have to hire a plumber, but there are some things you can do yourself. When you have a clogged drain, it’s important to be able to find out what’s causing it and what you can do about it. If you’re dealing with a clogged drain, you might want to read this article and see if you can figure out what’s going on.

Why It Happens?

Clogged drains happen because there is something in your pipes that is stopping the water from draining. There are a lot of different things that can cause your drains to get clogged, but one of the most common things  a clogged drain occurs is  too much grease, hair or soap gets trapped in the drain. When it starts to build up, it can get blocked. When you have a clogged drain, your pipes can become damaged as well. The water in the pipe can swell and then burst. This can also lead to leaks in your house. If this happens, you could have a big mess on your hands. To avoid having a clogged drain, make sure that your drains are cleaned regularly.

How to Fix it?

1. Make Your Home a Smarter Place by Installing an Anti-Clog Filter at Your Drains

Most people don’t think about installing filters for their home’s drains because they don’t see them as something that needs to be done. But, when your drains get clogged, it is a problem. One of the best ways to keep your drains from getting clogged is to install a filter at your sinks and bathtub drains. There are some things you can do yourself, like making sure the drain lines in your bathroom and kitchen are cleaned regularly. If you have a hard time cleaning these drains, it’s a good idea to hire a professional plumber.  If you are living somewhere in Toronto then call Toronto Plumber. They are well-experienced plumbers. They find any potential problems before starting the work.

2. Prevent Water Damage with Drainage System Maintenance

Your drainage system is important, so you should make sure you’re doing everything you can to keep it in working order. When your drains get clogged, it’s important that they are regularly cleaned and maintained. The first thing you need to do is to check your pipes to make sure there is nothing that is blocking them. Then, you can take a step back and look at what you’ve got in the pipes. A lot of people use a plunger when they need to clear a clogged drain, but it’s not the only way. If you use a plunger, you need to make sure that it doesn’t put too much pressure on your pipes.

3. Remove the Stink by Clearing Your Sink Drain

Most people will have a problem with stinky drains. They can be unsightly and smell bad. If you notice that your sinks are getting clogged, it’s important to be able to remove the stench. If you have a blocked drain, there are some things you can try to remove the smell. You can pour a cup of vinegar in the drain and let it sit for 30 minutes. This will help break down any bacteria that might be stuck in your drains. If you have an old, rusty drain, you might want to try pouring boiling water down it. Boiling water is great for cleaning drains because it can break apart the gunk in them.

4. Solve the Drain Clog Quickly with a Plunger

If all else fails, you can always use a plunger. It’s cheap, it works, and it’s easy to use. If you’re not sure how to use a plunger properly, you can read this simple guide: Place the tip of the plunger in the drain and then press down on it. Then, pull up on the handle of the plunger and it will unclog your drain. If you do this often enough, it should keep your drains flowing smoothly.   

5. Unclog the Drain with an Auger

The auger is another tool that can be used to unclog your drains. It’s a bit more expensive than using a plunger, but it’s worth the investment. This tool works by pushing the clog from the top to the bottom of the pipe. It can even cut through the clog if you use a pointed tip. However, be careful when using an auger because there are many things that can go wrong. For example, if you don’t have a snake or grabber, you can use the auger to pull the clog out of the drain. If that fails, you can make sure to use a snake or grabber in order to unclog the drain. 

6. Fix It Right with a Pipe Snake or Grabber

When you need to use a snake or grabber, you first need to know what size drain snake you need. There are several sizes and each one is made for a different size drain. A snake with too small a diameter will not be able to reach the bottom of your drain. On the other hand, a snake with too large a diameter will push everything in the pipe out of the way, but it might damage your pipes. You also need to know the length of the snake you need. The standard snake is 18 inches long, but you can get longer or shorter ones as well. When you use the right size snake, you can easily reach the bottom of your drain and remove the clog.


The clogged drains are something we all have to deal with from time-to-time. Most of us don’t realize that what we are dealing with is just a small part of a much larger problem. Hope this brief can help you identify the problem and give you some solutions. 


Please enter your comment!
Please enter your name here